Delivery time approx. 3-5 working days
Volume Discount
from 1 pair
Savings:
0 %/pair
from 12 pair
Savings:
13 %/pair
from 48 pair
Savings:
19 %/pair
from 240 pair
Savings:
25 %/pair
pair
pair
PRODUCT INFORMATION
Description
Details
Extras
- EN 388:2016, Mechanical risks, 3122X
- EN 511:2006, Protection against the cold, 12X
- Very supple and extremely wear-resistant ox grain leather
- ISOFILL® 200 lining
- Water repellent and breathable features
- Reinforcements on the fingertips and index fingers
- Backs of hands in grey cotton canvas
- Cuffs with reflectors
- Application areas: For heavy-duty, long tasks in the construction sector in cold weather
- Length: approx. 27 cm
Click on the "Data Sheet" button for more information and technical details.
| Lining / Filling | ISOFILL® 200 |
| Gloves | EN 388:2016 EN 511:2006 |
| Special properties | Cold protection |
| Material / coating | Leather |
| Glove total length | 25 - 28 cm |
Mechanical risks
Protection gloves of this standard need to protect against physical and mechanical loads such as wear, cuts, puncturing, tearing or felling cuts. These loads can occur when working with metal or wood or any other tasks where hands need to be protected against mechanical injury.
Protection gloves for mechanical risks must satisfy at least one of the test criteria listed in the table.
Testing Criteria:
Abrasion Resistance: 0-4
Cut Resistance: 0-5
Tear Resistance: 0-4
Puncture Resistance: 0-4
EN-ISO cut resistance: A-F
EN impact protection: yes/no
Abrasion Resistance: 0-4
Cut Resistance: 0-5
Tear Resistance: 0-4
Puncture Resistance: 0-4
EN-ISO cut resistance: A-F
EN impact protection: yes/no
The higher the number (shown with an X below the icon in the example), the better the test result.
Protection against the cold
When selecting protection gloves for work in the cold, the tasks and also the environmental conditions (humidity, ambient temperature) must be taken into account, because if the gloves become wet, they may lose their insulating properties. Likewise, the protection gloves should remain flexible in these conditions and not lead to hand fatigue, even in extreme temperatures.
Winter work gloves against the cold should offer protection against both convective cold and direct contact, i.e. with cold objects. In both cases, 4 is the highest performance level.
Checking that the gloves are waterproof is voluntary. There are two values for this: 0 and 1. If after 30 minutes no water has penetrated, the gloves are marked with the value 1.
Strauss offers both waterproof and also winter work gloves for optimum protection against the cold.
Testing Criteria:
Convective Cold Resistance: 0-4
Contact Cold Resistance: 0-4
Water Permeability: 0-1
Convective Cold Resistance: 0-4
Contact Cold Resistance: 0-4
Water Permeability: 0-1
The higher the number (shown with an X below the icon in the example), the better the test result.
ISOFILL® 200
Warmth - light and easy – the combination of soft inner lining and ultra-fine padding for perfect thermal insulation and absolute breathability. Very light and pleasantly soft, ISOFILL® guarantees warmth without volume.
Leather
- Wear-resistant
- Sturdy and tear-proof
- Good mechanical protection
- For heavy-duty work
Leather gloves
Grain leather, also called full leather, is the upper most valuable layer of the leather. It is the former fur side of the skin and can be recognised by its natural smooth surface that makes it resistant to oils, grease and wet. It is also very strong and supple. This means that the sturdy, very wear-resistant grain leather is ideal wherever dexterity is required. Gloves made of upholstery leather are also produced from grain leather.
Winter gloves
These are gloves specially designed for cold winter days; they satisfy specific work requirements and keep the hands warm thanks to a variety of materials.
Additional information
RECOMMENDED USE
Our assessments are based on practical experience. The valid EN standards have not been taken into consideration. The properties of the individual gloves were assessed in comparison to all other gloves of the respective material group. The higher the assessment, the more suitable the glove is for this field.
Important: The assessment is not a legally binding statement about the actual application suitability. For thisplease refer to the respective EN standards with the test code of the various gloves here in the text of the details screen.
Important: The assessment is not a legally binding statement about the actual application suitability. For thisplease refer to the respective EN standards with the test code of the various gloves here in the text of the details screen.
Abrasion
7
Breathability
4
Chemical protection
0
Cold
9
Cut
5
Dexterity
2
Fat/Oil
3
Heat
3
Wet protection
3
Puncture
2
Tear
5
Wet grip
4
Purchase advice
Mix & Match
Language selection
All prices plus VAT