Delivery time approx. 3-6 working days
colour
4 variants
select
Volume Discount
from 1 pair
Savings:
0 %/pair
from 3 pair
Savings:
3 %/pair
from 10 pair
Savings:
5 %/pair
pair
select
pair
PRODUCT INFORMATION
Ultralight S2-protection
How much weight can we save while maintaining the same level of safety? A lot, as proven by the S2 safety shoes e.s. Rom low!
Weighing just 390 grams, they still provide the full S2 protection package, including innovative carbon-fibre-reinforced toe protection. It’s more than just impressive – you can feel it too. These are not only among our lightest but also our most casual worker sneakers. The clean yet stylish design allows for many combinations. Particularly perfect for high-movement jobs, where every gram less makes a real difference for your feet at the end of a long day.
Description
Details
Extras
- EN ISO 20345:2022 S2 with 100 % metal-free composite toe cap according to EN ISO 22568-2:2019 - extra light, reinforced with carbon fibres
- Outer material and tongue made of breathable microfibre
- Breathable mesh inner lining with microfibre heel reinforcement
- Free of metal and leather
- Dirt cannot penetrate thanks to the closed tongue design
- Pleasantly padded tongue and shaft edge
- TPU reinforcements on areas subject to heavy wear for more stability and durability
- Removable, full-surface anatomically shaped insole
- ESD features according to DIN EN 61340 with a leak resistance between > 0.1 Megaohm (1.0 x 105 Ohm) to < 100 Megaohm (1.0 x 108 Ohm)
- Anti-slip lightweight rubber / EVA sole conforms to SR, anti-static and heat-resistant up to approx. 70 °C
Weight: approx.390grams in size42
Click on the "Data Sheet" button for more information and technical details.
| Protection classes | S2 |
| Shape | Normal shoes (low) |
| Footwear | DIN EN 61340 (ESD) EN ISO 20345 (safety shoes) |
| Toe cap | Composite |
| Sole material | EVA Rubber |
| more sole requirements | Anti-static ESD |
| Wet/weatherproof | no water penetration (min. 60 mins) |
| Heat resistance up to | Below 100 °C |
| Highest slip resistance | SR |
| Foot width | Normal |
| Upper material | Microfiber |
| Inner material | Textile |
| Fastener system | Laces |
| Special features | closed tongue design ESD-compatible leather-free metal-free Scuff cap / Tip protection |
| Weight of size 42 | Up to 500 g |
ESD
Workplaces that need to be protected from electrostatic discharges are called Electrostatic Protected Area or ESD workplaces. Thanks to anti-static equipment, e.g. anti-static work clothing and ESD safety shoes, electrostatic charging usually caused by friction is prevented in these areas. In line with the current ESD norms, the maximum electrostatic charges are stated for ESD protected areas. This serves to protect against electrostatic discharges that could damage or destroy sensitive electronic parts. Work and protection shoes with ESD features must satisfy the requirements of the DIN EN 61340 standard with a bleeder resistance of between > 0.1 mega ohms (1.0 x 105 Ohm) and < 100 mega ohms (1.0x 108 Ohm). EN 1149-5:2008 in conjunction with EN 1149-3:2004 governs the properties of protective clothing with electrostatic properties.
Additional information
Mix & Match
colour
4 variants
Language selection
All prices plus shipping
on orders below 998,75 kr..
All prices plus VAT
plus shipping
on orders below 799,00 kr..