Delivery time approx. 2-4 working days
Workwearstore availability is being checked
colour
5 variants
select
Volume Discount
from 1 pair
Savings:
0 %/pair
from 3 pair
Savings:
5 %/pair
from 10 pair
Savings:
8 %/pair
pair
select
pair
PRODUCT INFORMATION
STRONG PROTECTION WITH MEMORY FOAM COMFORT
Exclusively made in our CI-Factory in Germany. This is where the work shoes of the future are made – and the S1 safety low shoes e.s. Zembra come packed with modern features. Thanks to specially developed memory foam in the forefoot area and their anatomical design, the S1 shoes relieve pressure with every step and ensure an optimal fit. Alongside great comfort, the e.s. Zembra model also delivers plenty of protection. Top of the list: an innovative carbon fibre-reinforced composite toe cap. These protective caps are significantly lighter than conventional plastic or metal toe caps - a huge advantage for anyone covering a lot of ground at work!
The shape of the cap is especially comfortable, and the carbon composite material also offers clear benefits when it comes to thermal conductivity.
Description
Details
Extras
- EN ISO 20345:2011 S1 with 100 % metal-free composite toe cap acc. to EN ISO 22568-2:2019 - extra light, reinforced with carbon fibres
- Lightweight, comfortable and breathable
- Upper material made of microfibre with lasercut perforation
- Free of metal and leather
- Strap made of breathable mesh material
- Almost seamless finish
- Pleasantly padded strap and collar
- Textile inner lining with microfibre heel reinforcement
- Removable, full-surface anatomically shaped insole
- ESD features according to DIN EN 61340 with a leak resistance between > 0.1 Megaohm (1.0 x 105 Ohm) to < 100 Megaohm (1.0 x 108 Ohm)
- Also ideal for insole wearers, also for orthopaedic fittings (raised soles)
- Insole with a specially developed memory foam forefoot padding
- Anti-slip PUR/TPU two-layer sole conforms to SRA, anti-static, fuel-resistant and heat-resistant up to approx. 130 °C
Weight: approx.550grams in size42
Click on the "Data Sheet" button for more information and technical details.
| Protection classes | S1 |
| Shape | Normal shoes (low) |
| Footwear | DIN EN 61340 (ESD) EN ISO 20345 (safety shoes) |
| Toe cap | Composite |
| Sole material | PU / PUR |
| more sole requirements | Anti-static ESD |
| Heat resistance up to | 100-150 °C |
| Base slip resistance | SRA |
| Suitable for insole wearers | orthopaedic foot protection orthopaedic overlay (raised sole) possible |
| Foot width | Normal |
| Upper material | Microfiber |
| Inner material | Textile |
| Fastener system | Laces |
| Special features | ESD-compatible leather-free metal-free Scuff cap / Tip protection |
| Weight of size 42 | Over 500 g |
Made in Germany
Made by Strauss
Exclusively manufactured in our CI Factory.
This is where the shoes of the future are created.
Exclusively manufactured in our CI Factory.
This is where the shoes of the future are created.
ESD
Workplaces that need to be protected from electrostatic discharges are called Electrostatic Protected Area or ESD workplaces. Thanks to anti-static equipment, e.g. anti-static work clothing and ESD safety shoes, electrostatic charging usually caused by friction is prevented in these areas. In line with the current ESD norms, the maximum electrostatic charges are stated for ESD protected areas. This serves to protect against electrostatic discharges that could damage or destroy sensitive electronic parts. Work and protection shoes with ESD features must satisfy the requirements of the DIN EN 61340 standard with a bleeder resistance of between > 0.1 mega ohms (1.0 x 105 Ohm) and < 100 mega ohms (1.0x 108 Ohm). EN 1149-5:2008 in conjunction with EN 1149-3:2004 governs the properties of protective clothing with electrostatic properties.
Additional information
Mix & Match
colour
5 variants
Language selection
All prices plus shipping
on orders below 178,50 €.
All prices plus VAT
plus shipping
on orders below 150,00 €.