Delivery time approx. 2-4 working days
Workwearstore availability is being checked
colour
3 variants
select
Volume Discount
from 1 box
Savings:
0 %/box
from 10 boxes
Savings:
22 %/boxes
from 30 boxes
Savings:
26 %/boxes
box
select
box
PRODUCT INFORMATION
Description
Details
Extras
- EN ISO 374-5:2016 - VIRUS, Chemicals and Micro Organisms
- EN ISO 374-1:2016 - Typ B, chemical risks, KPT
- AQL 1.5
- With rolled edge
- Low protein and accelerator values
- Free of thiurams
- Extra anti-slip thanks to the roughened inside hand surface
- Allergy risk is reduced to a minimum
- Areas of use: For brief, direct contact with dry and aqueous foods and foods containing acids and alcohol, as well as milk products. Contact is permitted with foods with a correction factor of at least 3 in accordance with appendix III, table 2 of directive (EU) No. 10/2011.
- Length: approx. 24 cm
100 items per dispenser box
Click on the "Data Sheet" button for more information and technical details.
| Gloves | EN ISO 374-1:2016 - TYPE B EN ISO 374-5:2016 - VIRUS |
| Special properties | AQL Chem. resistant Food-safe Waterproof |
| Material / coating | Latex |
| Glove total length | 20 - 24 cm |
Microorganisms
It is usually assumed that protection gloves that withstand penetration in the test, offer effective protection against bacteria and fungi. However, because many viruses are much smaller than bacteria and fungi, these protection gloves may offer inadequate protection in practical fields.
A protection glove that is resistant to bacteria is a watertight glove that has a maximum AQL value of 1.5 in the permeability test. The AQL value (AQL = Acceptable Quality Level) reflects a given limit or the minimum quality requirement.
In general, the lower the AQL value, the better the quality of the protection gloves.
Protection against microorganisms:
Gloves that protect against viruses, bacteria and fungi.
Gloves that protect against viruses, bacteria and fungi.
Full chemical protection TYP B
Full chemical protection gloves primarily aim to protect the hands against chemicals. They are assigned to the PSA Category III. Due to the infinite range of chemicals, there is no one specific glove that will offer protection against all liquids. Instead, the best product must be selected for the task at hand. Full chemical protection has a protection index of at least 2, i.e. a permeation time > 30 minutes for at least 3 of 12 statutory defined test chemicals. (Permeation = penetration on a molecular level).
TYPE B
Permeation performance at least level 2, >30 minutes against at least three chemicals in the list:
Permeation performance at least level 2, >30 minutes against at least three chemicals in the list:
Testing Criteria:
A- Methanol
B- Acetone
C- Acetonitrite
D- Di-chloromethane
E- Carbon disulphide
F- Tuluol
G- Diethylamine
H- Tetrahydrofuran
I- Ethyl acetate
J- N-Heptane
K- Sodium hydroxide 40 %
L- Sulphuric acid 96 %
M- Nitric acid 65%
N- Acetic acid 99 %
O- Ammonium hydroxide 25 %
P- Hydrogen peroxide 30 %
S- Hydrofloric acid 40 %
T- Formaldehyde 37 %
A- Methanol
B- Acetone
C- Acetonitrite
D- Di-chloromethane
E- Carbon disulphide
F- Tuluol
G- Diethylamine
H- Tetrahydrofuran
I- Ethyl acetate
J- N-Heptane
K- Sodium hydroxide 40 %
L- Sulphuric acid 96 %
M- Nitric acid 65%
N- Acetic acid 99 %
O- Ammonium hydroxide 25 %
P- Hydrogen peroxide 30 %
S- Hydrofloric acid 40 %
T- Formaldehyde 37 %
AQL-value
Acceptable Quality Level = method for determining quality in which a seal value of at least 1.5 has been specified for disposable gloves.
Powder-free
Ideal for allergy sufferers.
Latex gloves
Latex gloves offer excellent flexibility and tear-resistance as well as protection from fluids. The good wear properties make them ideal for light to medium work in dry and wet environments.
Latex – Very elastic and tear resistant. Very good gloves for medical work and food processing sectors.
Food-safe
These gloves are suitable for contact with food in compliance with Regulation (EC) No. 1935:2004 (on materials and items intended to come into contact with food).
Please find detailed information in the data sheet.
Additional information
RECOMMENDED USE
Our assessments are based on practical experience. The valid EN standards have not been taken into consideration. The properties of the individual gloves were assessed in comparison to all other gloves of the respective material group. The higher the assessment, the more suitable the glove is for this field.
Important: The assessment is not a legally binding statement about the actual application suitability. For thisplease refer to the respective EN standards with the test code of the various gloves here in the text of the details screen.
Important: The assessment is not a legally binding statement about the actual application suitability. For thisplease refer to the respective EN standards with the test code of the various gloves here in the text of the details screen.
Abrasion
0
Breathability
0
Chemical protection
1
Cold
0
Cut
0
Dexterity
10
Fat/Oil
2
Heat
1
Wet protection
10
Puncture
0
Tear
1
Wet grip
6
Purchase advice
Mix & Match
colour
3 variants
Language selection
All prices plus shipping
on orders below 178,50 €.
All prices plus VAT
plus shipping
on orders below 150,00 €.