Delivery time approx. 2-4 working days
Workwearstore availability is being checked
colour
Volume Discount
from 1 pair
Savings:
0 %/pair
from 3 pair
Savings:
7 %/pair
from 12 pair
Savings:
14 %/pair
pair
pair
PRODUCT INFORMATION
Description
Details
Extras
- EN 388:2016, mechanical risks, 124XC
- EN 407:2020, thermal risks, 4331XX
- high-quality heat-resistant gloves made of an aramide-cotton mix
- the silicone coating on both sides ensures a secure and pleasant grip
- heat-resistant up to 350 °C
- can be washed by hand 5x
- extra long inner sleeve
- Application areas: ideal for working at high temperatures, e.g. hot sheets in the metalworking industry, welding work, hot grates or pans in the catering field
- Length: approx. 36 cm
- Size 10
Material:
Shell
100 %Aramid
Lining
83 %Cotton/
17 %Polyester
Click on the "Data Sheet" button for more information and technical details.
| Gloves | EN 388:2016 EN 407:2020 |
| Special properties | Heat protection |
| Glove total length | 33 cm or more |
Mechanical risks
Protection gloves of this standard need to protect against physical and mechanical loads such as wear, cuts, puncturing, tearing or felling cuts. These loads can occur when working with metal or wood or any other tasks where hands need to be protected against mechanical injury.
Protection gloves for mechanical risks must satisfy at least one of the test criteria listed in the table.
Testing Criteria:
Abrasion Resistance: 0-4
Cut Resistance: 0-5
Tear Resistance: 0-4
Puncture Resistance: 0-4
EN-ISO cut resistance: A-F
EN impact protection: yes/no
Abrasion Resistance: 0-4
Cut Resistance: 0-5
Tear Resistance: 0-4
Puncture Resistance: 0-4
EN-ISO cut resistance: A-F
EN impact protection: yes/no
The higher the number (shown with an X below the icon in the example), the better the test result.
Thermal risks
One faces a number of thermal risks at work. For the protection effect of the gloves it is important to differentiate between ambient heat or direct contact with hot objects. Risks are also involved when faced with extreme heat caused by fires, radiation etc.
Heat protection gloves should have wear resistance properties and also a certain level of cut resistance. The minimum wear and tear resistance according to EN 388 is specified for protection gloves of the EN 407.
Fire-resistant and heat-resistant protection gloves from Strauss offer day-to-day safety at work.
Testing Criteria:
Flammability: 0-4
Contact Heat Resistance: 0-4
Convective Heat Resistance: 0-4
Radiant Heat Resistance: 0-4
Resistance to small drops of molten metal: 0-4
Resistance to large quantities of molten metal: 0-4
Flammability: 0-4
Contact Heat Resistance: 0-4
Convective Heat Resistance: 0-4
Radiant Heat Resistance: 0-4
Resistance to small drops of molten metal: 0-4
Resistance to large quantities of molten metal: 0-4
The higher the number (shown with an X below the icon in the example), the better the test result.
Additional information
RECOMMENDED USE
Our assessments are based on practical experience. The valid EN standards have not been taken into consideration. The properties of the individual gloves were assessed in comparison to all other gloves of the respective material group. The higher the assessment, the more suitable the glove is for this field.
Important: The assessment is not a legally binding statement about the actual application suitability. For thisplease refer to the respective EN standards with the test code of the various gloves here in the text of the details screen.
Important: The assessment is not a legally binding statement about the actual application suitability. For thisplease refer to the respective EN standards with the test code of the various gloves here in the text of the details screen.
Abrasion
5
Breathability
7
Chemical protection
0
Cold
2
Cut
7
Dexterity
1
Fat/Oil
2
Heat
10
Wet protection
0
Puncture
0
Tear
8
Wet grip
2
Purchase advice
Mix & Match
colour
Language selection
All prices plus shipping
on orders below 178,50 €.
All prices plus VAT
plus shipping
on orders below 150,00 €.