SALE-27%
Delivery time approx. 4-7 working days
colour
pair
pair
PRODUCT INFORMATION
Description
Details
Extras
- EN 388:2016, mechanical risks, 4X42C
- EN 407:2020, thermal risks, X1XXXX
- high cut resistance thanks to cut protection C
- special fine-knit design with HPPE fibres (High Performance Polyethylene)
- very long durability
- medium nitrile foam coating
- function for operating touch screens
- reinforced area between the thumb and forefinger for improved durability
- areas of use: Ideal for assembly work with sharp objects
- length: approx. 24.5 cm
!!! Seasonal item !!! Only while stocks last !!!
| Gloves | EN 388:2016 EN 407:2020 |
| Special properties | Cut protection |
| Material / coating | Nitrile-foam |
| Glove total length | 20 - 24 cm |
Mechanical risks
Protection gloves of this standard need to protect against physical and mechanical loads such as wear, cuts, puncturing, tearing or felling cuts. These loads can occur when working with metal or wood or any other tasks where hands need to be protected against mechanical injury.
Protection gloves for mechanical risks must satisfy at least one of the test criteria listed in the table.
Testing Criteria:
Abrasion Resistance: 0-4
Cut Resistance: 0-5
Tear Resistance: 0-4
Puncture Resistance: 0-4
EN-ISO cut resistance: A-F
EN impact protection: yes/no
Abrasion Resistance: 0-4
Cut Resistance: 0-5
Tear Resistance: 0-4
Puncture Resistance: 0-4
EN-ISO cut resistance: A-F
EN impact protection: yes/no
The higher the number (shown with an X below the icon in the example), the better the test result.
Thermal risks
One faces a number of thermal risks at work. For the protection effect of the gloves it is important to differentiate between ambient heat or direct contact with hot objects. Risks are also involved when faced with extreme heat caused by fires, radiation etc.
Heat protection gloves should have wear resistance properties and also a certain level of cut resistance. The minimum wear and tear resistance according to EN 388 is specified for protection gloves of the EN 407.
Fire-resistant and heat-resistant protection gloves from Strauss offer day-to-day safety at work.
Testing Criteria:
Flammability: 0-4
Contact Heat Resistance: 0-4
Convective Heat Resistance: 0-4
Radiant Heat Resistance: 0-4
Resistance to small drops of molten metal: 0-4
Resistance to large quantities of molten metal: 0-4
The higher the number (shown with an X below the icon in the example), the better the test result.
Heat protection gloves should have wear resistance properties and also a certain level of cut resistance. The minimum wear and tear resistance according to EN 388 is specified for protection gloves of the EN 407.
Fire-resistant and heat-resistant protection gloves from Strauss offer day-to-day safety at work.
Testing Criteria:
Flammability: 0-4
Contact Heat Resistance: 0-4
Convective Heat Resistance: 0-4
Radiant Heat Resistance: 0-4
Resistance to small drops of molten metal: 0-4
Resistance to large quantities of molten metal: 0-4
The higher the number (shown with an X below the icon in the example), the better the test result.
Textile gloves, coated
Thanks to the use of various coats, the hands are well protected in coated textile gloves whatever the task. Depending on the gloves chosen, the wear-resistant gloves offer excellent dexterity or are resistant to oil, grease and wet. Non-slip grip under light to heavy loads.
Nitrile foam coating
- roughened coating
- very breathable
- good wet and oily grip
- slight vibration damping
- for precision to heavy-duty work
Additional information
COLOUR CODING SYSTEM
One wristband colour for each size
Many helping hands at work? Excellent!
With the coloured marking on the wristband of our gloves, every employee quickly finds their correct size. Practical also for large orders for quick and clear storage of different sizes.
Purchase advice
Mix & Match
colour
All prices plus shipping
on orders below £ 108.00.
All prices plus VAT
plus shipping
on orders below £ 90.00.